??亚洲城游戏中心??

Contact UsProducts??亚洲城游戏中心??
Position: Hebei Jida Environmental Protection Equipment Co., Ltd. > Products > Pneumatic conveying equipment > Text
Contact us

河北省泊头市四营开发区 Address: Siying Development Zone, Botou City, Hebei Province
卢经理 Contact: Manager Lu
13463787893 Mobile: 13463787893
0317-8258609 Phone: 0317-8258609
1363314333@qq.com E_mail: 1363314333@qq.com
zcgywhs.com Website: zcgywhs.com

Pneumatic conveying equipment

Roots fan

浏览 Author Admin Browse Published 17/02/12

Roots fan

Main specifications:
Fan caliber: 50-200 mm  
Air volume: 0.8 – 90 m3 / min
Pressure: 0.1 – 0.9 kgf / cm2
Motor power: 0.75-90 kw or more  
Standard accessories:
· Universal base  
· Belt cover  
Fan pulley, motor pulley, V-belt  
· Suction muffler (with air filter)  
· Safety valve  
· Pressure gauge  
·lubricating oil  
· Foot Bolt

(1) Each model has a performance table and standard specifications, making it easy to select the fan model.  
(2) Including accessories, the fan body is standardized. Have a perfect mass production system, can meet your requirements at any time.  
(3) Because of the good spiral structure and the use of a muffler with a silent air filter that matches the fan, the operating sound of the fan is much lower than before.  
(4) The rotor is a precision product that has been fully processed. Complete dynamic balance has been achieved during processing and there is almost no vibration.  
(5) Adopt small design, small installation area.  
Features:  
1. The fixed spiral way with a spiral shape of more than 20 °, the inlet and exhaust air shielding line of the casing is cut into the spiral, and is opened sequentially by the rotation of the rotor, so there is a slight inlet and exhaust pulsation, and the operating sound is small.  
2. The rotor adopts a special shape, which is convenient for maintaining the mutual clearance between the rotors and further improving the efficiency.  
3. Because the rotor is a three-lobed linear type, the axial displacement of the rotor is in contact with it. It is sufficient to ensure the rotor clearance on the section.  
4. Due to the mass production of rotors using precision CNC machine tools, there is no performance error between the fans. In addition, the rotor has become balanced during the manufacturing process. The machine operates without vibration.  
5. The use of **** drive gear not only prolongs the service life, but also achieves low noise. Therefore, the bad interference from the gear to the product is completely ruled out.  
6, the output air is clean, does not contain any oily dust, the inside of the cabinet does not need oil lubrication, and adopts a structural design to prevent bearing gear oil from mixing into the inside of the cabinet.

七乐彩 欢乐拼三张 星力捕鱼 手机电玩平台