??亚洲城游戏中心??

Contact UsProducts??亚洲城游戏中心??
Position: Hebei Jida Environmental Protection Equipment Co., Ltd. > News Center > Text
Contact us

河北省泊头市四营开发区 Address: Siying Development Zone, Botou City, Hebei Province
卢经理 Contact: Manager Lu
13463787893 Mobile: 13463787893
0317-8258609 Phone: 0317-8258609
1363314333@qq.com E_mail: 1363314333@qq.com
zcgywhs.com Website: zcgywhs.com

News Center

Maintenance and working principle of industrial dust collector

浏览 Author Admin Browse Published 18/12/16

Maintenance and working principle of industrial dust collector

Before using the industrial dust collector, it is necessary to effectively open its cylinder cover to effectively check whether its dust storage bag is tight and the suction port is old, and then effectively cover its cylinder cover and check its power supply voltage. If necessary, Effectively pay attention to the motor's forward and reverse rotation.

Part of the industrial dust collector will use its belt-driven industrial vacuum cleaner. When it is used, it needs to be replaced with a new conveyor belt. When it is used, the rear door of its vacuum cleaner is opened and then replaced. Side door, and then effectively adjust and control its nut to the appropriate position.

When using industrial dust collectors, please note that the machine is strictly forbidden to be used in flammable and explosive places. If the filter bag of special material is not capable of absorbing ignition flames and ultra-high temperature waste, the equipment is without its filter and dust bag. It is strictly forbidden to use it, otherwise it will directly cause damage to the fan.

When the filter in the industrial dust collector or the filter bag is damaged, it needs to be replaced in time during use. Do not continue to use it. The suction hose must not be crushed, stepped on, or in the rear box. The temperature at the body shell is high, especially after working for a long time, pay attention to burns.

The industrial dust collector's biological dust storage bucket accumulates excessive debris, which needs to be cleaned in time during use, and then regularly clean its filter bag and filter, which can effectively ensure its smoothness. After the vacuum cleaner is overloaded, the heat in the control box is controlled. The relay will automatically cut off the power. At this time, you must unplug the power plug to find out the reason. After the thermal relay is reset, it will be used in the line.

七乐彩 欢乐拼三张 星力捕鱼 手机电玩平台