??亚洲城游戏中心??

Contact UsProducts??亚洲城游戏中心??
Position: Hebei Jida Environmental Protection Equipment Co., Ltd. > Industry Knowledge > Text
Contact us

河北省泊头市四营开发区 Address: Siying Development Zone, Botou City, Hebei Province
卢经理 Contact: Manager Lu
13463787893 Mobile: 13463787893
0317-8258609 Phone: 0317-8258609
1363314333@qq.com E_mail: 1363314333@qq.com
zcgywhs.com Website: zcgywhs.com

Industry knowledge

Cement plant dust collectors must be trimmed and installed before installation

浏览 Author Admin Browse Published 18/12/29

Cement plant dust collectors must be trimmed and installed before installation

Product advantages: ① The pulse bag type dust collector adopts the compartment air-stop pulse spray ash cleaning technology, which overcomes the shortcomings of the conventional pulse bag type dust collector and the compartment reverse blow dust collector. , Small air leakage rate, less energy consumption, less steel consumption, less floor space, stable and reliable operation, and good economic benefits.

The main control device of stand-alone dust collector. The output signal controls the electromagnetic pulse valve, and the compressed air is sprayed on the filter bag to clean the dust in sequence, so that the resistance of the dust collector is kept within the set range, and it can be installed after the repair is completed to ensure the dust collector's processing capacity and dust removal efficiency .

1. When lifting the dust collector, care should be taken to avoid damage to the cabinet and accessories. The ceiling diameter must be smaller than the dust collector. And welded in the ash storage pot.

4. Perform a comprehensive inspection of the components of the dust collector before installation, and check whether the components are intact and complete. If any missing, damaged or deformed parts are found, they must be repaired before installation.

5. Sealing fillers should be inserted between the flanges of the dust collector to tighten the bolts to ensure a reliable seal and prevent air leakage.

} Requires the following particle size slaked lime or another verified pre-sprayed material: 25% less than 20um 50% just to 15um 25% close to 5um ① Open the air inlet manual control valve. ② Start the pre-spraying of the dust collector. The dust collector of the cement plant must be repaired. ③ During the pre-spraying process, the dust-cleaning timers and pulse valves in all rooms should be closed. dust collector,

七乐彩 欢乐拼三张 星力捕鱼 手机电玩平台