- Ultra-low emission technology of converter gas dry bag dust removal system
- Do you know the boiler flame arrester of Jida Machinery?
- What is the reason for water vapor blocking the bag filter?
- Bag dust collectors are not pneumatic
- What is the post-treatment process of functional dust bag
- The reason why the bag filter has a high resistance during operation
- Pay attention to the air leakage rate when installing the bag filter
河北省泊头市四营开发区 Address: Siying Development Zone, Botou City, Hebei Province
卢经理 Contact: Manager Lu
13463787893 Mobile: 13463787893
0317-8258609 Phone: 0317-8258609
firstname.lastname@example.org E_mail: email@example.com
zcgywhs.com Website: zcgywhs.com
What is the reason that water vapor blocks the bag filter? Let's first discuss how water vapor blocks the bag filter? Today, industrial technology is more and more developed, more and more industrial equipment, and more and more types of smoke and dust are generated. In the dust removal industry, many water vapors have prevented incidents of bag dust collectors. Some time ago, bag dust collectors from Beijing customers were blocked again. ...
The reason why the bag filter is not aerodynamic during the production is that the fan can not draw smoke when the fan is turned. Talents do not match, there is generally a lack of talents in the system; fume hoods, coolers, bag filters and induced draft fans have unreasonable structures, talents are lacking; ash is not standardized, and chaos ...
The reason for the high resistance of the bag filter in operation For a bag filter, whether its design concept is qualified and the operation is normal, mainly reflected in the service life of the bag of the filter and the equipment during operation Resistance, and sometimes if the filter bag is damaged, it has a lot to do with the high resistance when the equipment is running. The correct design structure and accessories are bag ...
How much air leakage rate should be noticed during the installation of the bag dust collector? Installation of the bag dust collector: 1. Pay attention to prevent deformation when lifting the bag dust collector. When the equipment leaves the factory, key parts are welded with lifting ears, please use the lifting ears for lifting. 2. After installation of the box, bag room, air inlet and outlet, ash hopper, etc., all joints should be sealed and airtight, and welded and sealed ...
How to modify and improve the dust removal efficiency of the bag dust collector. It should be noted that the bag dust collector does not intend to reduce the dust load in the adsorbed gas in the test silo, such as installing a dust separation device in the silo or the return pipe. Therefore, there is no final judgment on the test. But it is clear from the results that improving the separation process of the dust in the silo adsorbed gas can achieve ...
How to reduce the dust removal efficiency of the bag dust collector? During the operation of the bag dust collector, a large amount of dust slowly drops at the ash bucket, and the leaking airflow caused by the upward flow causes the second flying of the falling dust, multiple cycles, and air leakage at the dust outlet The dust concentration of the dust collector can be greatly higher than the dust concentration of the air intake. If the leakage of the dust outlet of the dust collector is not blocked, it will be caused by evil ...
Pulse dust collectors are insulated in winter and waterproof in the rainy season. The coldest month in the north has an average temperature of -16 ° C. According to our company's previous engineering experience, the production line operation in winter produces much more dust and water vapor than in summer. Water vapor is condensed in the dust removal pipe, and an insulation layer is added to the outside of the pipe. The dust collector box adopts the knot from our place ...
The main failures and avoiding methods of the bag dust collector bag: 1. Burning: The reason for the burnt of the bag of the dust collector is mainly due to the insufficient thickness of the initial layer on the surface of the dust bag and the temperature of the flue gas is too high. It mainly occurs in the middle of the dust collector. On a single dust bag, it mainly occurs within 1 meter from the outlet. 3. Dust removal ...
Bag dust collector dust removal method and operation reliability ① Mechanical vibration dust removal method uses mechanical devices to shake or shake the frame of the suspended filter bag, which causes the filter bag to vibrate and remove dust. Most of the round bags exert vibration on the top, so that It produces vertical or horizontal vibration, or both vertical or horizontal vibration at the same time, the position of applying vibration is also in the middle of the filter bag ...
The cement factory dust collector must be trimmed and installed before the product can be installed. Product advantages: ① This pulse bag type dust collector uses divided-room air-stop pulse spray ash cleaning technology, which overcomes the shortcomings of conventional pulse bag type dust collectors and divided-room back-blow dust collectors. Strong ash capacity, high dust removal efficiency, low emission concentration, small air leakage rate, less energy consumption, less steel consumption, less floor space, stable and reliable operation, economic efficiency ...